Command Prompt errors & solution in Networking

Common run Command Errors

A]    ipconfig — Media disconnected

Issue

1. Cable not connected
2. The device on the other side is turned off

Solution

1. Check with different cables
2. Turn on the other devices

B]    Ipconfig — Windows IP configuration

Issue

1. N/w card is disabled

Solution

• Enable n/w card

C]    Ping — destination host unreachable

Issue:

1. The device you are trying to ping is turned off

• The device you are trying to ping is not a part of the network

Solution

1. Check the IP address
2. Disable firewall on both ends
3. Disable and Enable the N/w card

D]    Ping–Request timed out

Issue:

1. Destination devices has received the packets but not responding to it

Solution

1. Disable firewall
2. Disable/Enable network card

E]    Ping — error code 64 or ping transmit error

Issue

1. Because of firewalls specially zone alarm

Solution

1. Disable firewall and zone alarm